What is included in the RockShox Motion Control + Air Shaft Rebuild Kit?

The kit includes three tools: a Motion Control Mid-Valve Clamp sized 9/16" (14.3 mm), a 10 mm Shaft Clamp for air shaft work, and a Dust Wiper Seal Press Tool V2. It does not include lubricants, suspension oil, sockets, or circlip pliers — those must be sourced separately per your fork's service manual.

Which RockShox forks is this rebuild kit compatible with?

This kit is designed for RockShox base-model forks equipped with a Motion Control open-bath damper and DebonAir or DebonAir+ air shafts — specifically Pike, Yari, Revelation, Judy, Recon, 35 Gold, and 35 Silver. It is not compatible with Select-level or higher RockShox forks; if your fork says "Select" or above, this kit does not apply.

How does the RockShox Motion Control + Air Shaft Rebuild Kit differ from generic damper tool kits?

Generic damper tool kits are typically designed for IFP-based or bleed-style dampers. The Motion Control damper is an open-bath system with no IFP and no bleed process, requiring a specific mid-valve clamp (9/16" / 14.3 mm) and precise oil volumes. This kit provides the exact clamp sizes matched to Motion Control internals and DebonAir air shafts, reducing the risk of damaging the fork's fragile components.

What additional tools do I need to complete a RockShox Motion Control damper service?

Beyond this kit, you will need a 24 mm socket for the damper top cap, circlip pliers, suspension-specific oil (volume per your fork's manual), and Slickoleum or SRAM Butter as lubricant. Isopropyl alcohol is also required to clean shafts before clamping. Refer to the relevant RockShox manual for your fork model (2019–2023 Yari/Lyrik, 2019–2023 Pike/Revelation, 2020–2022 35, or 2018–2023 Judy/30/Recon).

What are the key tips for using the RockShox Motion Control + Air Shaft Rebuild Kit correctly?

Clean all shafts with isopropyl alcohol before clamping and remove all old grease before applying new lubricant. Use only a minimal amount of Slickoleum or SRAM Butter on the air shaft — over-greasing causes suction issues and degrades fork performance. Use the 10 mm clamp to secure the air shaft when removing the foot nut or bumpers, and confirm your damper and air shaft type before beginning service.

1 7

Shockwave Parts

RockShox Motion Control + Air Shaft Rebuild Kit

Name: RockShox Motion Control + Air Shaft Rebuild Kit
Brand: Shockwave Parts
Availability: InStock

$57.49 CAD

Promotion Épuisé

Frais d'expédition calculés à l'étape de paiement.

With is your Rockshox fork's stanchion diameter? 30mm 32mm 35mm 38mm

RockShox Motion Control + Air Shaft Rebuild Tool Kit

Kit d’outils complet pour le rebuild du damper Motion Control et du air shaft sur les fourches RockShox de base. Si ta fourche est marquée « Select » ou plus haut, ce kit n’est pas pour toi. Ce kit est destiné aux dampers Motion Control open-bath : Pike, Yari, Revelation, Judy, Recon, 35 Gold/Silver, etc.

Inclus dans ce kit

Motion Control mid-valve clamp (9/16" / 14,3 mm)
10 mm shaft clamp pour le travail sur le air shaft
Dust Wiper Seal Press Tool V2

Pourquoi le Motion Control est différent

Le damper Motion Control est un design open-bath : pas d’IFP, pas de procédure de bleed, mais des internals très fragiles et des volumes d’huile extrêmement précis.

Détails du rebuild du air shaft

Compatible avec les air shafts DebonAir et DebonAir+
Appliquer une couche très légère de Slickoleum / SRAM Butter, trop de graisse cause des problèmes de succion

Référence de volumes d’huile open-bath

Utiliser ce tableau comme référence estimée.

Manuels RockShox essentiels

Conseils pour le service du air shaft