Horizontal Shaft Clamps β For Air Shocks
This collection includes all of our horizontal-style shaft clamps designed for working on air shocks with large damper bodies and eyelets including models like theΒ Cane Creek Kitsuma and DB Inline Air. These clamps are wider, made to sit flat in a standard bench vise without contacting the shock body. It's wider than the entire shock so you can clamp with the shock insides the jaws.
Why These Are Different:
- No seat on the clamps: allows free positioning of the shaft anywhere in the bench vise without forced alignment
- Wider body with rectangular profile for rock-solid grip in bench vises
-
Built-in magnets to hold the clamp halves together during setup
Available Sizes:
- 8 mm (Cane creek Mostly)
- 9.5 mmΒ
- 10 mm
We do not currently offer 12,13,14mm or 1/2 and 5/8" versions, since no air shocks use those shaft sizes. But if you truly need one,Β send us an email.
Special Note on Fox Float X2:
Due to the extremely small clearance between the shaft and shock body, we created dedicated clamps for each Float X2 generation. These are listed separately and include different heights depending on stroke length.
See Float X2 2026+ Version
Usage Tips:
- Wrap the shaft in a layer of paper towel or regular printer paper to increase grip
- Spray a little isopropyl alcohol inside the clamp for bonus friction
- Never overtighten in the vise, these are designed for precision, not brute force
- Use a luggage scale and our torque calculator for accurate reinstallation torque
- See our full usage guide
β οΈ These are home-use clamps, not shop-duty fixtures. Proper cleanliness and setup are critical β if the clamp slips, stop and reassess. Damage to shafts or tool wear from misuse is not covered. By purchasing or using these clamps, you agree to our terms and conditions.
