The rebound knobs on 2026+ FOX Float X2 and DHX2 shocks are very small and difficult to turn quickly, especially when sweeping through the adjustment range after a rebuild.

This coaxial tool allows you to control both the high-speed rebound and low-speed rebound adjusters easily.

The center hole also provides access to the small screw that holds the rebound knob assembly in place.

• FOX Float X2 2026+
• FOX DHX2 2026+

The small rebound knobs on these shocks can be frustrating to turn by hand.

This tool makes it much easier to quickly sweep through the adjustment range when servicing the shock.

Because of the coaxial design, both rebound adjusters remain accessible and easy to turn without changing tool.

• Place the tool over the rebound adjuster assembly
• Use the outer interface to rotate the high-speed rebound adjuster
• Use the inner interface to rotate the low-speed rebound adjuster
• The center hole allows access to the small retaining screw

If the retaining screw is stuck, the tool can help stabilize the adjusters while loosening it.

When rebuilding the shock, it is common to sweep the rebound adjusters fully open and closed several times to test if everything works fine.

This tool makes those adjustments much faster and easier than turning the small knobs by hand.

By purchasing or using this tool, you agree to our Terms of Service.