Shockwave Parts
Ultimate Clamp Set | Medium Diameters
Ultimate Clamp Set | Medium Diameters
Couldn't load pickup availability
Ultimate Clamp Set Medium | Small fork Dampers
The perfect clamp set for medium diameters. Covers Motion Control, Fox FIT dampers, open bath damper shafts, and many other forks. It covers 10+ sizes!
If you work on fork dampers or air assemblies regularly, this set is your go-to. One kit that locks down everything from small fork dampers to larger open bath designs.
⚠️ Important Warning
Never clamp directly on a damper body or shaft without the proper tool.
Always clean with isopropyl alcohol before clamping.
Size note: these clamps are made of plastic and are designed to tolerate slight size differences. Several sizes in this set intentionally work between nominal diameters.
In practice, an in-between clamp behaves like a half-size step (for example ~20.5 mm).
Use paper or paper towel as a fine adjustment:
• For the 20-21mm, add 3-4 layers to increase grip and reduce clamping force on a 20mm damper.
• For a 21mm damper, use no wrapping or a single thin layer and let the clamp conform.
Do not overtighten. The material compliance is intentional and provides secure holding without damaging parts and allow for more sizes in a single clamp.
Usage manuals:
- Clamp Small Shafts
- Clamp Large Diameters
What It Does
- Works on Motion Control and other large open bath damper shafts
- Covers Fox FIT dampers and similar assemblies
- Clamps medium-diameter fork damper bodies and air assemblies securely
- Provides safe grip for sealhead removal, rebound stack access, and bleeding
Clamp Sizes Included
- 9/16"
- 17.5 mm
- 3/4"
- 19 mm to 20 mm
- 21 mm to 22 mm
- 23 mm to 24 mm
Compatibility Notes
- Designed for fork damper bodies and medium-diameter shafts
- Fits Fox FIT dampers, RockShox Motion Control, and similar systems
- Works on both air and oil bath assemblies in this diameter range
- Not intended for small shafts (see Ultimate Clamp Set Small) or oversized bodies (see Large Clamp Set)
Share
