Shockwave Parts
Shock Eyelet Drive Adapter
Shock Eyelet Drive Adapter
Couldn't load pickup availability
Shock Eyelet Drive Adapter
This tool is a dedicated shock eyelet drive adapter designed for use with a 32 mm socket. It allows you to safely tighten or remove virtually any standard rear suspension eyelet using a ratchet or torque wrench without scratching, marking, or crushing the aluminum.
Important Compatibility Info
- Compatible with all standard suspension eyelets (width-wise).
- Requires a 32 mm socket (not included).
- Works with virtually any 1/2" drive ratchet or torque wrench.
- Some shocks with rebound adjusters close to the eyelet may require extra care to ensure adequate clearance.
What This Tool Does
The adapter fully surrounds the eyelet, creating a positive, non-slip interface while transferring torque through a standard 32 mm socket. This provides a secure way to install or remove suspension eyelets using conventional workshop tools without damaging the eyelet.
Usage Tips
- Use only with a 32 mm socket.
- Always follow the suspension manufacturer's recommended torque specifications.
- Although this adapter is capable of handling high torque loads, most suspension eyelets require only very low torque.
- Ensure the adapter is fully seated before applying force.
- If your shock has a rebound adjuster near the eyelet, verify there is sufficient clearance before tightening.
Specs
- Application: Rear suspension eyelets
- Drive interface: 32 mm hex
- Compatible tools: 32 mm socket, ratchet, or torque wrench
- Material: Reinforced polymer (3D-printed)
- Torque capacity: Suitable for both low- and high-torque applications
- Includes: One Shock Eyelet Drive Adapter
⚠️ Suspension eyelets can be permanently damaged if over-tightened. This adapter provides a secure interface for accurate torque application but does not prevent user error. Always follow the suspension manufacturer's torque specifications. By using this tool, you agree to our terms and conditions.
Share
