1
/
of
2
Shockwave Parts
RockShox Motion Control Shaft Clamp 9/16"
RockShox Motion Control Shaft Clamp 9/16"
Regular price
$25.49 CAD
Regular price
Sale price
$25.49 CAD
Shipping calculated at checkout.
Quantity
Couldn't load pickup availability
RockShox Motion Control Shaft Clamp (9/16")
Precision 9/16" (~14.3 mm) clamp made specifically for RockShox Motion Control dampers. Other clamp sizes do not grip properly, this is the correct one.
Fit & Size Note
The Motion Control shaft measures about 14.3 mm (9/16").
• 14 mm clamps are too loose
• 15 mm clamps are too large
This 9/16" clamp is the only proper fit.
• 14 mm clamps are too loose
• 15 mm clamps are too large
This 9/16" clamp is the only proper fit.
Usage Warning
Always clean the shaft with isopropyl alcohol before clamping.
Wrap with one layer of paper towel if needed.
Do not over-tighten the vise, the clamp provides the grip.
Guide: How to Clamp Small Shafts
Wrap with one layer of paper towel if needed.
Do not over-tighten the vise, the clamp provides the grip.
Guide: How to Clamp Small Shafts
What It Does
- Holds the Motion Control shaft firmly (~14.3 mm)
- Prevents spinning while removing the rebound-side mid-valve
- Avoids damage from vise jaws or incorrect clamp sizes
Compatibility
- All RockShox Motion Control dampers
- Seen in: older Pike, Lyrik, Reba, SID, Recon, Revelation, 35 Gold/Silver, Sektor, Judy, etc.
- Not compatible with Charger, Charger 2/3, or any non-Motion Control damper
Tools You May Need
- Slickoleum / SRAM Butter
- Isopropyl alcohol + clean towels
Disclaimer
Always clamp with full surface contact and apply vise pressure gradually.
Use at your own risk. Terms of Service
Use at your own risk. Terms of Service
Share
