Shockwave Parts
Cane Creek Helm Air Fork 50h Lower Leg Service Tool
Cane Creek Helm Air Fork 50h Lower Leg Service Tool
Couldn't load pickup availability
Β Cane Creek Helm (Air) Fork 50h Lower Leg Service with Dust Wiper Replacement
Lower leg service for all Cane Creek Helm Air forks with fresh oil and dust wiper seal replacement. Refresh performance, reduce friction, and extend fork life.
Works for original Helm and MKII
This service adds dust wiper replacement to the standard 50-hour lower leg service. Youβll need a 35mm dust wiper press tool, the same tool also works on RockShox Lyrik, pre-2024 boxxer and similar forks. Use our Dust Wiper Finder to confirm compatibility.
The 35mm Dust Wiper Tool is shown on a 2013 Rockshox Boxxer R2C2 Fork
Apply SRAM Butter on the lower leg stanchion bushings, it makes a huge difference on the stick friction!
- 13mm socket
- 13mm and 18mm open-end or crowfoot wrenches
- Torque wrench (capable of 5β7 Nm)
- Pick (for foam rings and removing old seals)
- 35mm Dust Wiper Press Tool (required for reinstallation)
- Motorex 15wt Racing Fork Oil
- Isopropyl alcohol + lint-free cloths
Only the 35mm dust wiper tool is included with this listing. If you're missing basics, check our Essential Tools Starter Pack.
Official Service Manual: View on Cane Creek
Official Video: Watch here
- Never hit the foot nuts and if you really need to, never hit small shafts coming out form the center!!
- Add 10β15 psi to the air spring before reinstalling lowers to extend the shaft
- Donβt overtighten the nuts, they are sealed by O-rings, not torque
- The 35mm wiper tool also fits RockShox Lyrik, great if you own multiple forks
- Use our Torque Calculator to tighten bolts with a luggage scale
- Only for Cane Creek HELM Air forks
- Always depressurize slowly and equalize charge before service
- Never strike damper or spring shafts, push gently while pulling lowers
- Use correct oil volumes and reinstall wipers evenly
Share



