{"product_id":"stanchion-station","title":"StanchionStation | Angled Shaft Clamp for Fork Stanchions","description":"\u003c!-- ===== PRODUCT DESCRIPTION ===== --\u003e\n\u003csection class=\"toolkit-description\" style=\"max-width: 800px; margin: auto; padding: 2rem; line-height: 1.6;\"\u003e\n\u003ch1 style=\"font-size: 1.75rem; margin-bottom: 0.5rem;\"\u003eStanchionStation — 35 \/ 38 \/ 40 mm, Angled\u003c\/h1\u003e\n\u003cp\u003e\u003cem\u003eThree stanchion sizes in one tool. The clamp station covers 35 mm, 38 mm and 40 mm tubes, so a single clamp handles almost every dual-crown and inverted fork on your bench instead of three separate ones taking up drawer space.\u003c\/em\u003e\u003c\/p\u003e\n\u003c!-- ANGLED ONLY --\u003e\n\u003cdiv style=\"background: #f5f3ff; border-left: 4px solid #7c3aed; padding: 1rem; margin-top: 1.2rem;\"\u003e\n\u003cstrong\u003eAngled only — and that's on purpose.\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eStanchion tubes are long. The angle sends the tube off to the side so it clears the center of the vise instead of running into the base or the bench. On a multi-size station this matters even more than on a single-size clamp: it works on any vise, big or small, so we skipped the straight version entirely rather than make you guess which one fits your setup.\u003c\/div\u003e\n\u003c!-- WHAT IT COVERS --\u003e\n\u003cdetails style=\"margin-top: 1.2em;\"\u003e\n\u003csummary style=\"padding: 0.8em; background: #fff7e6; border-left: 4px solid #ff9800; font-weight: bold; cursor: pointer;\"\u003eWhat It Covers\u003c\/summary\u003e\n\u003cdiv style=\"padding: 1em 0.8em; border-left: 4px solid #ff9800; background: #fffaf1;\"\u003e\n\u003cul style=\"margin: 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003e35 mm\u003c\/strong\u003e — RockShox BoXXer 2011–2023, Intend inverted forks, older Marzocchi 888, and other 35 mm stanchion forks\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e38 mm\u003c\/strong\u003e — RockShox BoXXer 2024 and newer, Öhlins DH38, Fox 38\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e40 mm\u003c\/strong\u003e — Fox 40 (all generations), Marzocchi Bomber 58\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"margin-top: 0.8em;\"\u003e\u003cstrong\u003e36 mm is not included.\u003c\/strong\u003e It comes up rarely enough that adding a fourth bore would have made the station noticeably bigger and harder to fit in a vise. If you service the Fox Podium or PUSH 9.1, grab our dedicated 36 mm clamp instead.\u003c\/p\u003e\n\u003cp style=\"margin-top: 0.8em;\"\u003eFitment goes by stanchion diameter, not fork model. Not sure of your size? Use our \u003ca style=\"color: #0284c7; text-decoration: underline;\" href=\"https:\/\/calculator.shockwaveparts.com\/dust-wiper\" target=\"_blank\"\u003e Dust Wiper Seal Finder Tool \u003c\/a\u003e, it uses the exact same diameter reference.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c!-- WHY YOU NEED THIS --\u003e\n\u003cdetails style=\"margin-top: 1.2em;\"\u003e\n\u003csummary style=\"padding: 0.8em; background: #e8f4ff; border-left: 4px solid #2196F3; font-weight: bold; cursor: pointer;\"\u003eWhy You Need This\u003c\/summary\u003e\n\u003cdiv style=\"padding: 1em 0.8em; border-left: 4px solid #2196F3; background: #f4f9ff;\"\u003e\n\u003cul style=\"margin: 0;\"\u003e\n\u003cli\u003eDouble crown forks don't connect the stanchions through the crown — once removed, they spin freely\u003c\/li\u003e\n\u003cli\u003eDamper and compression assemblies are often torqued tight and cannot be opened by hand\u003c\/li\u003e\n\u003cli\u003eFull 360° contact spreads the load instead of pinching a single point\u003c\/li\u003e\n\u003cli\u003eOne tool instead of three if you work on a mix of forks\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c!-- HOW TO USE --\u003e\n\u003cdetails style=\"margin-top: 1.2em;\"\u003e\n\u003csummary style=\"padding: 0.8em; background: #eafaf0; border-left: 4px solid #16a34a; font-weight: bold; cursor: pointer;\"\u003eHow to Use It Properly\u003c\/summary\u003e\n\u003cdiv style=\"padding: 1em 0.8em; border-left: 4px solid #16a34a; background: #f5fdf8;\"\u003e\n\u003cul style=\"margin: 0;\"\u003e\n\u003cli\u003ePick the bore that matches your stanchion exactly. Never use an oversized bore and hope the wrap takes up the slack.\u003c\/li\u003e\n\u003cli\u003eClean the stanchion thoroughly with \u003cstrong\u003eisopropyl alcohol\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eWrap a clean layer of printer paper or paper towel around the tube.\u003c\/li\u003e\n\u003cli\u003eSpray 1–2 times inside the bore with isopropyl, it increases grip dramatically.\u003c\/li\u003e\n\u003cli\u003eSeat the tube fully in the bore. Never clamp with partial contact — you need \u003cstrong\u003efull 360° contact\u003c\/strong\u003e.\u003c\/li\u003e\n\u003cli\u003eSet the station in the jaws with the angle running clear of the vise center before you close it, so you are not repositioning under load.\u003c\/li\u003e\n\u003cli\u003eClamp gently but firmly. If it slips, stop and redo your prep rather than adding force.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c!-- WARNING --\u003e\n\u003cdetails style=\"margin-top: 1.2em;\"\u003e\n\u003csummary style=\"padding: 0.8em; background: #ffecec; border-left: 4px solid #e53935; font-weight: bold; cursor: pointer;\"\u003eCritical Warning\u003c\/summary\u003e\n\u003cdiv style=\"padding: 1em 0.8em; border-left: 4px solid #e53935; background: #fff5f5;\"\u003e\n\u003cp style=\"margin: 0;\"\u003e\u003cstrong\u003eEven one grain of dirt can permanently scratch your stanchion.\u003c\/strong\u003e\u003cbr\u003eAlways clean everything thoroughly and inspect the bore and the clamping zone before locking it down. Check the bore itself too — on a multi-size tool it is easy to grab the station off the bench without noticing debris sitting in one of the other bores.\u003c\/p\u003e\n\u003cp style=\"margin-top: 0.8em;\"\u003eFull usage guide: \u003ca href=\"\/pages\/how-to-use-a-big-diameter-shaft-clamp-20mm\" style=\"color: #0284c7; text-decoration: underline;\" target=\"_blank\"\u003e How to Clamp Large Diameters (Guide) \u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c!-- DISCLAIMER --\u003e\n\u003cdetails style=\"margin-top: 1.2em;\"\u003e\n\u003csummary style=\"padding: 0.8em; background: #f0f2f4; border-left: 4px solid #64748b; font-weight: bold; cursor: pointer;\"\u003eDisclaimer\u003c\/summary\u003e\n\u003cdiv style=\"padding: 1em 0.8em; border-left: 4px solid #64748b; background: #f8fafc;\"\u003e\n\u003cp style=\"margin: 0;\"\u003eRefer to our \u003ca href=\"\/policies\/terms-of-service\" style=\"color: #0284c7; text-decoration: underline;\" target=\"_blank\"\u003e Terms of Service \u003c\/a\u003e for full details.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e","brand":"Shockwave Parts","offers":[{"title":"Default Title","offer_id":54192826384748,"sku":"SCL-353840-3M-ANGL","price":68.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0917\/8991\/8572\/files\/StanchionStation_1.png?v=1786650704","url":"https:\/\/www.shockwaveparts.com\/products\/stanchion-station","provider":"Shockwave Parts","version":"1.0","type":"link"}